PEW european jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. They are widely applied to crush high hardness, mid-hardness and soft rocks and ores such as slags, construction materials, marble, etc. The pressure resistance strength is under 350Mpa, Jaw Crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.PE series jaw crusher can break the materials into medium and fine size, very suitable for primary crushing and secondary crushing.
2.Characteristics of Small Diesel Engine Jaw Crusher
1. It has three tyres in the bottom, easy to move and operate, no need to install it to the ground;
2. Large crushing ratio, uniform particle size products;
3. Pad-style nesting population adjustment devices, and ease of adjustment range, and increase the flexibility of the equipment;
4. Safe and reliable lubrication system, convenient replacement parts, small maintenance workload;
5. Structure is simple, reliable; low operating costs.
6. Energy-saving equipment: stand-alone energy-saving 15% ~ 30%; energy saving of the system is more than doubled;
7. The discharging size of jaw crusher can be adjusted to meet the requirements of different users;
8. Low noise and less dust.
Working Principle:
This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Model | Feed Opening (mm) | Max Feeding (mm) | Discharge Opening (mm) | Capacity (t/h) | REV (r/min) | Power (kw) | Motor Model | Machine Size (mm) |
PEW250*1000 | 250*1000 | 220 | 20-40 | 15-50 | 330 | 6-37 | Y250M-6/37 | 1400*1850*1310 |
PEW250*1200 | 250*1200 | 220 | 20-40 | 20-50 | 330 | 6-37 | Y250M-6/37 | 1400*2050*1310 |
PEW400*600 | 400*600 | 350 | 35-85 | 15-70 | 250 | 6-37 | Y250M-6/37 | 1920*1460*1840 |
PEW760 | 760*1100 | 620 | 75-200 | 150-350 | 270 | 6-110 | Y315L1-6/110 | 2600*2500*2200 |
PEW860 | 860*1100 | 720 | 100-225 | 200-500 | 240 | 6-132 | Y315L2-6/132 | 3300*2320*3120 |
PEW1100 | 1100*1200 | 930 | 150-275 | 300-650 | 210 | 8-185 | Y355L1-8/185 | 4140*2660*3560 |
Model |
Feeding Opening Size (mm) |
Max.Feeding Size(mm) |
Adjustment Range of Discharging Opening (mm) |
Capacity(t/h) |
Power(kw) |
Overall Drmension (mm) |
PE-250×400 |
400×250 |
210 |
20-80 |
5-20 |
15 |
1430×1315×1296 |
PE-400×600 |
600×400 |
350 |
40-100 |
15-65 |
30 |
1700×1732×1653 |
PE-500×750 |
500×750 |
425 |
50-100 |
45-110 |
55 |
2035×1921×2000 |
PE-600×900 |
900×600 |
480 |
65-140 |
90-180 |
55-75 |
2290×2206×2370 |
PE-750×1060 |
1060×750 |
630 |
80-160 |
110-320 |
110 |
2655×2302×3110 |
PE-900×1200 |
900×1200 |
750 |
100-200 |
200-400 |
132 |
3380×2870×3330 |
PE-1000×1200 |
1000×1200 |
850 |
195-260 |
220-450 |
160 |
3480×3876×3330 |
PE-1200×1500 |
1200×1500 |
1020 |
150-300 |
400-800 |
180-220 |
4200×3750×3820 |